fhavran
Aktivitätsübersicht
Neueste Aktivität von fhavran
-
fhavran hat einen Kommentar hinterlassen
I had the same problem, that the new value set using the "actual temperature" function on the relevant smart radiator valve changed back to the original old value after some time. I found out that ...
- Kommentar anzeigen
- 0 Stimmen
-
fhavran hat einen Kommentar hinterlassen
Two days ago, I posted a notice that the new value set using the "actual temperature" function on the relevant smart radiator valve would change back to the original old value after a certain perio...
- Kommentar anzeigen
- 0 Stimmen
-
fhavran hat einen Kommentar hinterlassen
Dear Netatmo Energy users, after announcing the removal of the "actual temperature" setting malfunction, I found that the system records and sets the new "actual temperature" setpoint, but after ap...
- Kommentar anzeigen
- 0 Stimmen
-
fhavran hat einen Kommentar hinterlassen
By checking the network communication on my router, I found that when sending a new "actual temperature" value, there is probably no data transfer between the mobile application and the Netatmo sys...
- Kommentar anzeigen
- 2 Stimmen
-
fhavran hat einen Kommentar hinterlassen
The True temperature cannot be set in the application again. The command is sent, but the change is not implemented!
- Kommentar anzeigen
- 3 Stimmen
-
fhavran hat einen Kommentar hinterlassen
I also have the same problem. All I can say for sure about the new application is that nothing in it works correctly as before!
- Kommentar anzeigen
- Bearbeitet
- 2 Stimmen
-
fhavran hat einen Kommentar hinterlassen
Have you verified that your password is correct?
- Kommentar anzeigen
- 0 Stimmen
-
fhavran hat einen Kommentar hinterlassen
And I will never buy thermostatic valves that are controlled by an application on the manufacturer's servers again! Netatmo has put me off it! I am changing the system after the heating season.
- Kommentar anzeigen
- 1 Stimme
-
fhavran hat einen Kommentar hinterlassen
Yes, it is enough to set the relevant parameter so that the system starts the heating at the request of the thermostatic heads and is not controlled by the thermostat. In the main menu, select the ...
- Kommentar anzeigen
- Bearbeitet
- 1 Stimme
-
fhavran hat einen Kommentar hinterlassen
Before I started using the NETATMO system, I used ordinary digital thermostats, which had programmed regular opening and closing of the thermostatic valve during the period of non-heating, which pr...
- Kommentar anzeigen
- 1 Stimme