caspar
Kommentare
Neueste Aktivität von caspar
-
https://www.magnumheating.nl/product/w-controller/ Magnum has a system to connect a acuator to a controller. BUt then 2 have 2 systems running... Perhaps a coop with Magnum??
- Kommentar anzeigen
- 0 Stimmen
-
You will have to wire the new Thermostat/Relais in front of the actuator and then run 2 wires from it‘s auxiliary port to your boiler and connect them in parallel to your existing Thermostat/Relais...
- Kommentar anzeigen
- 0 Stimmen
-
Thanks so much for helping me out!🙏
- Kommentar anzeigen
- 1 Stimme
-
I hoped the actuator would solve the problem
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
First floor: floor heating no zones needed. Room thermostat is there. Second and 3th floor 9 netatmo radiator valves. Everything works find but when I ask for heat on the 2 or 3 th floor the floor ...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
Do I need an extra relais?
- Kommentar anzeigen
- 0 Stimmen
-
How do I connect the actuator to the boiler and work with the relais?
- Kommentar anzeigen
- 0 Stimmen
-
I have a Intergas Extreme 36, the relais is put in the x13 nr 1 and 2. According to the above the grey wire should be connected toe the brown wire of the actuator. But how do I connect the blue wir...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
Can I use the Honeywell MT4-230-NC-HCC for this?
- Kommentar anzeigen
- 0 Stimmen
-
How do I wire the actuator to the Relais? There is no wire input
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen