GEORGzer Community moderator
Kommentare
Neueste Aktivität von GEORGzer
-
A Smoke Detector really should go on the ceiling. So I guess double-sided-tape would be your alternative. Same goes for your Carbon Monoxide Detector, you asked about in the other section.
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
You‘ll have to add it to the power supply of the boiler (not pictured). Look for something labeled „230V L N PE“ or similar. The black/grey wires of the Relais go to the terminals marked as „2“ (...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
And I don’t pay much attention to that here in Austria 😅
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
hasn‘t that UV forecast index always been there?
- Kommentar anzeigen
- 0 Stimmen
-
As far as I can tell from the press release, only the main Weather Station with its Outdoor Module got redesigned. All accessories (Additional Module, Rain Gauge, Wind Gauge, Shield) stay the same.
- Kommentar anzeigen
- 1 Stimme
-
It is working again for me, no App update needed. The fix was applied server-sided.
- Kommentar anzeigen
- 0 Stimmen
-
You can use the Netatmo Thermostat with underfloor heating if you A: replace a room-thermostat with the Netatmo Thermostat or B: wire the Netatmo Relais directly to an standard 230v actuator and pl...
- Kommentar anzeigen
- 0 Stimmen
-
If you‘re referring to the diameter of the wires then that doesn‘t matter. The black and grey wires of the Netatmo Relais never carry any current at all. When heating is requested, those wires get...
- Kommentar anzeigen
- 0 Stimmen
-
On page 57 of this manual you can see the mainboard of your boiler. https://www.protherm.cz/files/downloads/navody-k-instalaci/ni-tiger-condens-flamefit-2043908.pdf The Netatmo Thermostat has to be...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
If it still doesn't work, please post you boiler brand and model and maybe a photo of how you connected the Netatmo Relais, thanks 👍
- Kommentar anzeigen
- 0 Stimmen