GEORGzer Community moderator
Kommentare
Neueste Aktivität von GEORGzer
-
„only the hot water is activated and the radiator boiler does not activate“ You mean hot water like in your bathtub/shower but radiator heating didn‘t work before either?
- Kommentar anzeigen
- 0 Stimmen
-
TA1 should be the correct terminal to connect a thermostat. Unless another thermostat was installed before, there should be a bridge cable that has to be removed before connecting the Netatmo Therm...
- Kommentar anzeigen
- 0 Stimmen
-
Il n'y a pas de risque de conflit puisque tout ce que fait le Relais est de fermer le circuit entre les fils noirs et gris, ils ne fournissent aucun courant électrique. Ainsi, avoir deux d'entre eu...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
Oui, vous pouvez le faire, il suffit de câbler les fils noirs/gris en parallèle. Original answer since I don’t speak french 😅: Yes you can do that, just wire the black/grey wires in parallel.
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen
-
Glad it‘s working now. Polarity of the black/grey wires is not important, they never carry any currency. All that happens when the Thermostat switches on is that those two wires get bridged interna...
- Kommentar anzeigen
- 0 Stimmen
-
Hm, without looking up this brand any closer I can say that connecting the black/grey wires to BUS is not correct. You have to connect them where the jumper cable was.
- Kommentar anzeigen
- 0 Stimmen
-
Did they come with the base? Are they on the base, so powered on and if so, do they flash red periodically?
- Kommentar anzeigen
- 0 Stimmen
-
Sorry to hear that. Maybe they will respond now since the holidays have passed.
- Kommentar anzeigen
- 0 Stimmen
-
Manual mentions an „OpenTherm Extension“ but I wasn’t able to obtain more information, sorry.
- Kommentar anzeigen
- 0 Stimmen
-
Take a look here, Wind Gauge „L. Base“ is the last one in the list. https://helpcenter.netatmo.com/hc/en-us/articles/21894924977810-I-have-lost-or-broken-a-part-of-my-Weather-Station-module-how-can...
- Kommentar anzeigen
- Bearbeitet
- 0 Stimmen