erratic temperature reading on valve (
I have few days ago installed a netatmo starter pack on 2 radiators. Both valves and the gateway are on the latest firmware. One of the valves starting reading erratic temperature figures completely off from the actual room temperature. I used the ios app to set the correct room temperature using "True Temperature" interface of the app but for some reason although the app confirms the set temperature as read on the thermometer both radiator display and the app claim to show colmpletely off figures. Say, I set true temp to 23 and confirm. I wait for a few seconds as I see the radiator valve reads 38. Then I wait for 10-20min to make sure that it's not changing before I once again attempt to set it to 23 then it starts reading 28. Even if I manage to get it to 23, it only stays there for a few min then swithes to a completely different temp like 18 degrees even if I do not touch anything. Apparently there is a unacceptable bug which I guess is getting firmware updtes and applying them. I believe netatmo will raise a ticket about this issue as I am not the onyl one trying to live with this in the middle of winter. What a shame :(
Comments
1 comment
Same problem. My heating system goes crazy. Huge consumption. One of my netatmo valves is not closing because it shows a bad temp
Please sign in to leave a comment.