fhavran
Resumen de la actividad
Última actividad de fhavran
-
fhavran hizo un comentario,
I had the same problem, that the new value set using the "actual temperature" function on the relevant smart radiator valve changed back to the original old value after some time. I found out that ...
- Ver comentario
- 0 votos
-
fhavran hizo un comentario,
Two days ago, I posted a notice that the new value set using the "actual temperature" function on the relevant smart radiator valve would change back to the original old value after a certain perio...
- Ver comentario
- 0 votos
-
fhavran hizo un comentario,
Dear Netatmo Energy users, after announcing the removal of the "actual temperature" setting malfunction, I found that the system records and sets the new "actual temperature" setpoint, but after ap...
- Ver comentario
- 0 votos
-
fhavran hizo un comentario,
By checking the network communication on my router, I found that when sending a new "actual temperature" value, there is probably no data transfer between the mobile application and the Netatmo sys...
- Ver comentario
- 2 votos
-
fhavran hizo un comentario,
The True temperature cannot be set in the application again. The command is sent, but the change is not implemented!
- Ver comentario
- 3 votos
-
fhavran hizo un comentario,
I also have the same problem. All I can say for sure about the new application is that nothing in it works correctly as before!
- Ver comentario
- Editado
- 2 votos
-
fhavran hizo un comentario,
Have you verified that your password is correct?
- Ver comentario
- 0 votos
-
fhavran hizo un comentario,
And I will never buy thermostatic valves that are controlled by an application on the manufacturer's servers again! Netatmo has put me off it! I am changing the system after the heating season.
- Ver comentario
- 1 voto
-
fhavran hizo un comentario,
Yes, it is enough to set the relevant parameter so that the system starts the heating at the request of the thermostatic heads and is not controlled by the thermostat. In the main menu, select the ...
- Ver comentario
- Editado
- 1 voto
-
fhavran hizo un comentario,
Before I started using the NETATMO system, I used ordinary digital thermostats, which had programmed regular opening and closing of the thermostatic valve during the period of non-heating, which pr...
- Ver comentario
- 1 voto