GEORGzer Community moderator
Comentarios
Actividad reciente de GEORGzer
-
If you want to have two separate „homes“ of even run two separate Netatmo accounts then yes. Thermostat and Relais only come as a combo anyway.
- Ver comentario
- 0 votos
-
Every common 230v floor-heating actuator. You will need to pick one that fits your heating block. Then you will need to wire it to the Relais and the Netatmo Thermostat will operate wirelessly wich...
- Ver comentario
- 0 votos
-
yes, you need to run everything in "Comfort Priority" mode. https://helpcenter.netatmo.com/hc/en-us/articles/360021261971-The-radiators-in-one-of-my-rooms-are-not-giving-off-enough-heat-even-though...
- Ver comentario
- 0 votos
-
No, "Homes" are completely separated. You will need an extra Thermostat for the second apartment and wire that one in parallel on the boiler with the one from apartment 1.
- Ver comentario
- 0 votos
-
Sadly no, every manual set-point will be on a timer (5min to 12hours max), which also makes home automations kind of a pain in the behind.
- Ver comentario
- 0 votos
-
Is itpossible to use an actuator on the floor heating block? Are there any acluator who connect with netatmo? That is actually the only way.You need to replace the old room thermostats with Net...
- Ver comentario
- 0 votos
-
Thanks, I‘m honestly not sure if this is useful for me then. If I use 10 Valves with my own Boiler and Thermostat for 10 hours, report will say 10 hours. If I use 10 Valves on district heating wit...
- Ver comentario
- 0 votos
-
Do the new reports sum up all the heating-hours when you have multiple heating products in two or more homes? My report says 1132h for November, which is more than 31 days a 24 hours combined 🤷♂️
- Ver comentario
- Editado
- 0 votos
-
Thanks Giada, you’re right, that setting is present online and in the Home+Control app, but it’s missing in the Energy app. That’s why I couldn’t find it 😅
- Ver comentario
- 0 votos
-
Fascinating. I actually spent 30 minutes looking for the setting and couldn’t find it 🤷♂️ It was under „advanced settings“ in the past but that went away at some point.
- Ver comentario
- Editado
- 0 votos