GEORGzer Community moderator
Comentarios
Actividad reciente de GEORGzer
-
It is working again for me, no App update needed. The fix was applied server-sided.
- Ver comentario
- 0 votos
-
You can use the Netatmo Thermostat with underfloor heating if you A: replace a room-thermostat with the Netatmo Thermostat or B: wire the Netatmo Relais directly to an standard 230v actuator and pl...
- Ver comentario
- 0 votos
-
If you‘re referring to the diameter of the wires then that doesn‘t matter. The black and grey wires of the Netatmo Relais never carry any current at all. When heating is requested, those wires get...
- Ver comentario
- 0 votos
-
On page 57 of this manual you can see the mainboard of your boiler. https://www.protherm.cz/files/downloads/navody-k-instalaci/ni-tiger-condens-flamefit-2043908.pdf The Netatmo Thermostat has to be...
- Ver comentario
- Editado
- 0 votos
-
If it still doesn't work, please post you boiler brand and model and maybe a photo of how you connected the Netatmo Relais, thanks 👍
- Ver comentario
- 0 votos
-
Hm, then I would try to disconnect the Siemens Thermostat first. 2 Thermostats in parallel are always trouble.
- Ver comentario
- 0 votos
-
So did you already wire the Relais to your boiler then?
- Ver comentario
- 0 votos
-
Do you mean you want to replace this Siemens thermostat with the Netatmo Thermostat?
- Ver comentario
- 0 votos
-
Well, if the room temperature reading is actually not important, then you don‘t need a thermostat. Just wire a simple timer to your boiler and you get what you want, there are „smart“ ones with app...
- Ver comentario
- 0 votos
-
If you now correctly placed them all in the same room in the app, they should all act synchronized and also display the same temperature. But yes, if heat is requested for example, they all don’t o...
- Ver comentario
- Editado
- 0 votos