GEORGzer Community moderator
Comentarios
Actividad reciente de GEORGzer
-
Since the OP with the mixed system never reported back if they were successful or not, I can‘t really recommend a solution for something like this. In the end, it will remain a „hack“ that requires...
- Ver comentario
- 0 votos
-
If you're talking about the mobile phone standards, the Doorbell is connected to your local wifi, so it won't be affected by that.
- Ver comentario
- 0 votos
-
https://www.netatmo.com/en-eu/additional-smart-outdoor-module It's listed under accessories.
- Ver comentario
- 0 votos
-
Glad it worked out for you. Have you checked the packaging? Maybe it‘s still in there. If not, you should contact the seller and ask for a replacement Valve. Otherwise for official spare parts, you...
- Ver comentario
- Editado
- 0 votos
-
They connect with their own low power radio protocol like the Thermostat does. That’s the primary function of the Relais actually, being a bridge between that and the wifi.
- Ver comentario
- 0 votos
-
You’re welcome 🤗 Once you have everything set up, I‘d recommend this support article that describes the different modes available. https://helpcenter.netatmo.com/hc/en-us/articles/360021261971-Th...
- Ver comentario
- 0 votos
-
I‘m assuming you had a Smart Thermostat and now you bought additional Valves and not a Valve Starter Pack that comes with it‘s own Relais. Since you need the Relais of your Thermostat and the Ther...
- Ver comentario
- 0 votos
-
👍
- Ver comentario
- 0 votos
-
The ! can mean connection problems as well, yes. But the need to calibrate the Valve after setting it up was always the case. However if you can‘t complete the setup then your issue is something e...
- Ver comentario
- 0 votos
-
If you followed the app instructions for setting up the Valves, the „vertical bar“ with the blinking wifi sign is actually the number „1“, indicating that this is the first Valve you set up. It wil...
- Ver comentario
- Editado
- 0 votos