GEORGzer Community moderator
Comentarios
Actividad reciente de GEORGzer
-
Thanks, the first screenshot indicates that you have single rooms with only one Valve each in them. On the second screenshot your‘re not changing the Valve‘s room, you‘re editing the room „type“. T...
- Ver comentario
- Editado
- 0 votos
-
can you post a screenshot of the „manage my home“ screen?
- Ver comentario
- 0 votos
-
To me it looks like you have every Valve in it‘s own room. Go to settings, „manage my home“ and add/name as many rooms as you need. Then navigate to the individual Valves in the settings, tap on t...
- Ver comentario
- 0 votos
-
🤔 can you post a screenshot of the app how it os displayed there?
- Ver comentario
- 0 votos
-
If you put them in the same „room“ in the app, then they will appear and act as a single unit.
- Ver comentario
- 0 votos
-
well done 👍 Without the boiler model of the OP, it’s hard to tell.
- Ver comentario
- 0 votos
-
Normally a 3-wire setup contains N, L and one return. L/N is needed to power the old thermostat and when heat is requested, L is send back through the return wire. It should be like that unless i...
- Ver comentario
- 0 votos
-
You can test your wiring by connecting 1 & 2 together without a Thermostat. If your boiler starts, then the Thermostat could be faulty. If not then the wiring is not correct. Although a 3 wire-setu...
- Ver comentario
- 0 votos
-
No need to, it‘s a constant calibrating/calculating process. When you do true temperature corrections, they are for the moment to steere the algorithm into the right direction. But it’s not like yo...
- Ver comentario
- 0 votos
-
There are 6 radiator adapters included (M30x1.5, M30x1.0, M28x1.5, Danfoss RAVL, Danfoss RA, Giacomini) M28x1.0 are sold separately.
- Ver comentario
- 1 voto