GEORGzer Community moderator
Comentarios
Actividad reciente de GEORGzer
-
You have to delete the Valves from the old Thermostat first, then delete the old Thermostat and then add the Valves to the new one.
- Ver comentario
- 0 votos
-
The code is bound to the new hardware, you have to wire the new Relais to your boiler and use the Thermostat, that came with the new Relais. Then you open the Apple Home App on your iPhone, press ...
- Ver comentario
- 0 votos
-
The Netatmo Doorbell got discontinued a while ago. If a store still offers it, it's old stock. However, it is still fully supported by the Security app. I once made wiring diagrams for different ...
- Ver comentario
- 0 votos
-
The tape needs to be suited for the type of ceiling material/coating you have. In general I would recommend a foam backed tape to compensate uneven surfaces for maximum adhesion. Ask a service per...
- Ver comentario
- 0 votos
-
A Smoke Detector really should go on the ceiling. So I guess double-sided-tape would be your alternative. Same goes for your Carbon Monoxide Detector, you asked about in the other section.
- Ver comentario
- Editado
- 0 votos
-
You‘ll have to add it to the power supply of the boiler (not pictured). Look for something labeled „230V L N PE“ or similar. The black/grey wires of the Relais go to the terminals marked as „2“ (...
- Ver comentario
- Editado
- 0 votos
-
And I don’t pay much attention to that here in Austria 😅
- Ver comentario
- Editado
- 0 votos
-
hasn‘t that UV forecast index always been there?
- Ver comentario
- 0 votos
-
As far as I can tell from the press release, only the main Weather Station with its Outdoor Module got redesigned. All accessories (Additional Module, Rain Gauge, Wind Gauge, Shield) stay the same.
- Ver comentario
- 1 voto
-
It is working again for me, no App update needed. The fix was applied server-sided.
- Ver comentario
- 0 votos