-
<% blocks.forEach(function(block, index) { %>
-
<% if (imageHeight) { %>
<% } %> <% if (block.name) { %>
<%= block.name %>
<% } %> <% if (block.description) { %><%= block.description %>
<% } %>
<% }) %>
Commentaires
4 commentaires
Hello Mark,
I have 1 indoor module, 1 outdoor module, 1 outdoor wind sensor, 1 outdoor rain sensor. The battery of the rain sensor was changed. And now I do not have communication between indoor sensor and outdoor sensors.
Best regards
Bernd
Correct, the max configuration is:
Weather Station (Main Module + Outdoor Unit)
3 additional Indoor Units
Wind Gauge
Rain Gauge
If you want more Indoor Units you either need a second Weather Station or stand alone sensors like the Healthy Home Coach, but that one uses it‘s own app.
Hi,
Have a look at this post for an explanation about adding another station to enable you to get more internal modules:
https://helpcenter.netatmo.com/hc/en-us/community/posts/18827179594002-If-you-need-to-connect-more-than-three-internal-modules
Hope this helps.
GEORGzer, thank you. I’ve ordered my third and have found out why I couldn’t install the second module: the instructions said touch the top button and wait for it to turn white or blue. It only turned orange. The trick was to touch the top button for 10 seconds and it turned blue.
Thanks again.
Mark
Vous devez vous connecter pour laisser un commentaire.