okank
Aperçu des activités
Dernière activité effectuée par okank
-
okank a ajouté un commentaire,
I am using the standard Smart Thermostat in dry-contact (On/Off) mode. It is not a modulating (OpenTherm) setup. The relay is connected via COM and NO to the boiler’s RT terminals.
- Afficher le commentaire
- 0 vote
-
okank a ajouté un commentaire,
Thank you for your suggestion. One thing I am trying to understand is this: If the relay has a hardware defect, why does the system start working normally again after I completely power cycle the...
- Afficher le commentaire
- 0 vote
-
okank a ajouté un commentaire,
Thank you for your reply. Yes, the relay is powered from inside the boiler, so when I power cycle the boiler, the relay also restarts. I have not tested power cycling only the relay separately, b...
- Afficher le commentaire
- 0 vote
-
okank a créé une publication,
Netatmo Thermostat shows heating active but boiler does not fire after long standby
Hello, I am experiencing an intermittent issue with my Netatmo thermostat connected to an Airfel boiler (On/Off dry contact connection). Here is the problem: • When I set the temperature from 18°C...
- okank
- Modifié
- 2 abonnés
- 7 commentaires
- 0 vote