okank
Panoramica attività
Ultima attività di okank
-
okank ha commentato,
I am using the standard Smart Thermostat in dry-contact (On/Off) mode. It is not a modulating (OpenTherm) setup. The relay is connected via COM and NO to the boiler’s RT terminals.
- Visualizza commento
- 0 voti
-
okank ha commentato,
Thank you for your suggestion. One thing I am trying to understand is this: If the relay has a hardware defect, why does the system start working normally again after I completely power cycle the...
- Visualizza commento
- 0 voti
-
okank ha commentato,
Thank you for your reply. Yes, the relay is powered from inside the boiler, so when I power cycle the boiler, the relay also restarts. I have not tested power cycling only the relay separately, b...
- Visualizza commento
- 0 voti
-
okank ha creato un post,
Netatmo Thermostat shows heating active but boiler does not fire after long standby
Hello, I am experiencing an intermittent issue with my Netatmo thermostat connected to an Airfel boiler (On/Off dry contact connection). Here is the problem: • When I set the temperature from 18°C...
- okank
- Modificato
- 2 follower
- 7 commenti
- 0 voti