LarsOska
Activiteitenoverzicht
Nieuwste activiteit door LarsOska
-
LarsOska heeft een opmerking geplaatst,
This seems to be a poor design, the plastic layer is probably meant to deliver a smooth surface for the moving air.Not at all something that should have been removed during the manufacturing proces...
- Opmerking weergeven
- 1 stem
-
LarsOska heeft een opmerking geplaatst,
I had the same problem, a small part of the PCB where the sensor is attached is exposed to the weather.My outdoor unit did connect and report to the indoor hub bnt the temperature did not change. E...
- Opmerking weergeven
- 0 stemmen
-
LarsOska heeft een opmerking geplaatst,
I had similar problem, outdoor module was reporting a fixed temperature but the humidity and battery reported fine.Changed batteries and re-assigned it to the main module with no change.At the end ...
- Opmerking weergeven
- 0 stemmen
-
LarsOska heeft een opmerking geplaatst,
I can zoom in/out to each single time of report, normally in 5 minutes intervals. At least om my mobile devices. //Lasse
- Opmerking weergeven
- Bewerkt
- 0 stemmen
-
LarsOska heeft een opmerking geplaatst,
Hi Giada, One of my friends, that I recommended Netatmo to, just discovered the same problem.The plastic cover of the bottom surface is partly coming off. What is the best method to remove the plas...
- Opmerking weergeven
- 0 stemmen
-
LarsOska heeft een opmerking geplaatst,
I had the same problem with the plastic layer parting from the bottom. Netatmo support explained that they missed to remove it during the manufacturing process. Yeah, sure? 🤣 They asked me to remov...
- Opmerking weergeven
- 0 stemmen
-
LarsOska heeft een opmerking geplaatst,
I have a similar problem, my anemometer has frequent data dropouts, the last 3 month I have had 52 data dropouts of more than 1 hour, the longest drop out was for 8h 40m. Today it has been out betw...
- Opmerking weergeven
- 0 stemmen