benawitz
Resumen de la actividad
Última actividad de benawitz
-
benawitz hizo un comentario,
Hello Peter, I have the same problem with one old and one never unused outdoor sensor from Netatmo to integrate them again to my system. Through the last month I have read the same problem here fro...
- Ver comentario
- 0 votos
-
benawitz hizo un comentario,
I also deleted the Netatmo App on my Iphone and installed it new. Butit did not help. Always when I want to install the outdoor sensor and type on "Installation", the App change to buy a new sensor...
- Ver comentario
- 0 votos
-
benawitz creó una publicación,
No integration of outdoor Temp/humidity sensor
After changing battery of rain sensor all sensors had to be newly connected to the main indoor sensor. After several days rain sensor and later wind sensor was again connected. But I still have pro...
- benawitz
- 1 seguidor
- 1 comentario
- 0 votos
-
benawitz hizo un comentario,
I have the same problem. After battery of my rain transmitter had to be changed, all sensors had to be newly connected to the main unit. It takes me days. First rain transmitter, two days later rec...
- Ver comentario
- 0 votos
-
benawitz hizo un comentario,
Good Morning Giada, After changing batteries to my precipitation transmitter all sensors where out of the system and I had to try a connection again. This takes any hours before wind and precipit...
- Ver comentario
- 0 votos
-
benawitz hizo un comentario,
Hi Giada, Many thanks for your reply. May be I am blind. I did not find the link or buttom of the help center "Send a Request" Will search again. Best regards Bernd
- Ver comentario
- 0 votos
-
benawitz hizo un comentario,
After many tries I still could not integrate my outdoor sensor for temp/hum.. Precipitation and wind was possible to integrate again. Some years ago there was a direct contact with Netatmo possibl...
- Ver comentario
- 0 votos
-
benawitz creó una publicación,
Accidentally deleted outdoor temp/humidity in the app on the iphone
I accidentally deleted the display for the outdoor temperature and relative humidity sensor in the app and can no longer integrate the sensor. Reinstalling the app didn't help. When I try to inst...
- benawitz
- 2 seguidores
- 5 comentarios
- 0 votos
-
benawitz hizo un comentario,
Hello Mark, I have 1 indoor module, 1 outdoor module, 1 outdoor wind sensor, 1 outdoor rain sensor. The battery of the rain sensor was changed. And now I do not have communication between indoor se...
- Ver comentario
- 0 votos
-
benawitz creó una publicación,
Changed battery of raingauge, no sensor coud be configured again
I have an Netatmo weather station. Inside main sensor with temp/humidity, outside sensor temp/humidity, wind sensor, rain gauge. The battery of rain gauge must be repaced.After doing this, no senso...
- benawitz
- 3 seguidores
- 0 comentarios
- 0 votos