Netatmo thermostat with additional radiator valve
If my thermostat is in another room than the smart radiator valve, and the temperature of the room with the thermostat is warm enough, but the temperature of the room with the radiator valve is still too low, what will happen? Will the thermostat switch off the heating? Or will he switch off, after the other room (with the radiotor valve) is also warm enough?
Opmerkingen
3 opmerkingen
Take a look at this article:
https://helpcenter.netatmo.com/hc/en-us/articles/360021261971-The-radiators-in-one-of-my-rooms-are-not-giving-off-enough-heat-even-though-the-room-is-not-at-the-desired-temperature-What-should-I-do
What you need to use is the „comfort priority mode“.
The Thermostat will act as a „central controller“ for the room it is installed in and all other Valves can also request heat at any time.
Thank you for the information. That is what I need.
Is this available on any model of the thermostat?
I noticed there are different models of the thermostat. I found the NTH-PRO, the NTH01-AMZ, the NTH01-EN-EU. What is the difference?
Those are all the same product, just different production codes.
The only two different devices are the „Netatmo Smart Thermostat“ and the „modulating Thermostat“ that uses the OpenTherm protocol.
U moet u aanmelden om een opmerking te plaatsen.