GEORGzer Community moderator
Opmerkingen
Recente activiteit van GEORGzer
-
You can use any thermal 230V actuator. The important part is, that this actuator fits your heating block.
- Opmerking weergeven
- 0 stemmen
-
The Relais has two cables with two wires each. The brown/blue wires need to be connected to a power source. The grey/black wires never carry any current. All that happens when the Relais turns on i...
- Opmerking weergeven
- Bewerkt
- 0 stemmen
-
Yes, then both apartments can start the boiler and operate individually. To be clear, I‘m talking about the classic Netatmo Thermostat, not the modulating one.
- Opmerking weergeven
- 0 stemmen
-
If you want to have two separate „homes“ of even run two separate Netatmo accounts then yes. Thermostat and Relais only come as a combo anyway.
- Opmerking weergeven
- 0 stemmen
-
Every common 230v floor-heating actuator. You will need to pick one that fits your heating block. Then you will need to wire it to the Relais and the Netatmo Thermostat will operate wirelessly wich...
- Opmerking weergeven
- 0 stemmen
-
yes, you need to run everything in "Comfort Priority" mode. https://helpcenter.netatmo.com/hc/en-us/articles/360021261971-The-radiators-in-one-of-my-rooms-are-not-giving-off-enough-heat-even-though...
- Opmerking weergeven
- 0 stemmen
-
No, "Homes" are completely separated. You will need an extra Thermostat for the second apartment and wire that one in parallel on the boiler with the one from apartment 1.
- Opmerking weergeven
- 0 stemmen
-
Sadly no, every manual set-point will be on a timer (5min to 12hours max), which also makes home automations kind of a pain in the behind.
- Opmerking weergeven
- 0 stemmen
-
Is itpossible to use an actuator on the floor heating block? Are there any acluator who connect with netatmo? That is actually the only way.You need to replace the old room thermostats with Net...
- Opmerking weergeven
- 0 stemmen
-
Thanks, I‘m honestly not sure if this is useful for me then. If I use 10 Valves with my own Boiler and Thermostat for 10 hours, report will say 10 hours. If I use 10 Valves on district heating wit...
- Opmerking weergeven
- 0 stemmen