Smart Thermostat and set of Valves
Hi,
I have a configuration where Smart Thermostat (placed in Dininig Room) is controlling the heating boiler (gas) plus a set of smart valves placed in multiple rooms (Dining Room, Living Room, Office, Bedroom).
I have set the desired temperature to be 20 degrees centigrade in all of the rooms.
Now I find it a bit confusing. When a temperature in one of those rooms drops below 19 degrees I would except smart termostat to turn on the heating boiler and valve to open in that specific room to heat it up until getting desired temperature.
But it's not happening like that. Even if a difference of the temperature is 1,5 degrees.
The only way to "force" tormostat to turn on heating boiler is to manually increase a temperature in one of the rooms (even for 1 degree) - then applications somehow correctly interacts both with valve and termostat (really of the termostat to be precise) to turn heating.
What am I doing wrong?
In other words, I would except if temperature in any room drops lower than 1 - 1,5 degrees the heating should be turned on via termostat's really and the valve should open itself in that room to allow heating. What it does is - it does not turn on the heating.
Comments
1 comment
Take a look here, make sure you have the correct mode set.
https://helpcenter.netatmo.com/hc/en-us/articles/360021261971-The-radiators-in-one-of-my-rooms-are-not-giving-off-enough-heat-even-though-the-room-is-not-at-the-desired-temperature-What-should-I-do
Please sign in to leave a comment.