GEORGzer Community moderator
Commentaires
Activité récente par GEORGzer
-
I don’t think there is a way. They will be on holiday break I suppose, but should be back soon.
- Afficher le commentaire
- 0 vote
-
I hope they get back to you soon 👍
- Afficher le commentaire
- 0 vote
-
Black/Grey never carry any current. Those two only get bridged together internally when the Relais switches on (analog installment). And they are also for data communication (OpenTherm).
- Afficher le commentaire
- 0 vote
-
Maybe this video will help you. https://youtu.be/7TJ_yPu_fkM?si=ajn35UjK37Q0zdC2
- Afficher le commentaire
- 0 vote
-
Not with a Netatmo Valve at least, those are only suited for radiators since they take their own measurements. You would need to use an actuator for the floor-heating zone and hook that one up to t...
- Afficher le commentaire
- Modifié
- 0 vote
-
https://helpcenter.netatmo.com/hc/en-us/community/posts/21896243366418-Video-unavailable-Insufficient-power-source?page=1#community_comment_22076606898962 V8-2A is recommend
- Afficher le commentaire
- 0 vote
-
Those mixed systems are a pain 😅 See this thread, basically the same scenario. https://helpcenter.netatmo.com/hc/en-us/community/posts/21875715778066-Thermostatic-valve-and-floor-heating Floor-heat...
- Afficher le commentaire
- Modifié
- 0 vote
-
Ok I think we found a possible solution for your specific scenario. Turns out it won‘t be as simple as just buying another Thermostat because the software wouldn‘t allow that one to control the boi...
- Afficher le commentaire
- 0 vote
-
Controlling is the issue here. You need an input (Room Thermostat) that powers the Actuator only when heat is needed in that area, but also communicates with the Netatmo Thermostat connected to you...
- Afficher le commentaire
- Modifié
- 0 vote
-
Thank you for explaining. I‘m afraid this will be a tricky one since you have a mixed system. You would basically need a 10th Radiator Valve for the floor-heating zone, but this won‘t work properl...
- Afficher le commentaire
- 0 vote