- The Controller must be placed at least 50 cm off the floor with no obstacles between your product and your air conditioner.
- To avoid interfering with the built-in temperature and humidity sensors, avoid prolonged exposure to direct sunlight and don't place it next to a heat source (recommended distance: more than 1 meter).
Step to fixed your product on a wall
- Choose a location that meets the recommendations and mark it with a pencil.
- Then drill a 6mm hole at the mark with the drill.
- Insert the wall plug (provided) into the hole with the hammer
- Insert the screw (provided) with the screwdriver
- Plug your product into an electrical outlet.
For more help with the physical installation, visit setup.netatmo.com