During the configuration, the Smart Controller emits a beep to confirm that it has received an order sent by the remote. If you don't hear this beep, the Smart Controller will not be able to be configured correctly.
Check the following:

• Make sure the remote’s batteries are full and that the remote can control your AC.
• Make sure the remote is ON
• Point the remote toward the Smart Controller, when less than a metre from it

If you still don't hear a beep after completing these checks, follow these steps:

1. Unplug and plug in the Smart Controller from the power. Wait a few seconds, then launch the configuration from the product's settings: Menu > Manage my home > Room selection > Configure my remote
2. If step 1 didn't work, please reset and reinstall your product. To do so:
   1. Remove your product from Home + Control: Manage my home > Room > Smart Controller > Settings > Remove
   2. Insert a thin object (paper clip or pen tip) in the RESET button at the back of the product and press it for 10 seconds until the LED glows
   3. Reinstall the product

Updated July 21, 2023 13:50