Help Center

How to add a module to my Smart Home Weather Station?

Notes

  1. Do not insert batteries into the module until it is explicitly displayed in the application.
  2. Be sure to click ''next'' to move to the next step in the mobile application.
  3. With the Smart Home Weather Station you can install at a maximum:
    • 1 Outdoor Module (provided when purchasing a Smart Home Weather Station);
    • 1 Smart Rain Gauge;
    • 1 Smart Anemometer;
    • 3 Additional Smart Indoor Module (the large indoor module is not taken into account here).
  4. See this article for help on how to physically install your Smart Anemometer.
  5. See this article for help on how to physically install your Smart Rain Gauge.

Procedure

To add a module to your Smart Home Weather Station please follow the below steps:

  1. Open the Netatmo Weather application.
  2. Go to Settings > Install new products.
  3. Select « Add-ons for the Smart Home Weather Station ».
  4. Follow the instructions.
  5. Check that Bluetooth is activated on the mobile.
  6. Choose the module you want to add from the list.

If you are unable to install the module with your mobile device, you can use the PC/Mac/Linux installation wizard: Useful Ressources.

Updated

Was this article helpful?

Need more help? Submit a request